How To Boot Windows 10 Into Bios

On Computers, the Basic Input Output Organisation (BIOS) is an essential low-level software that sits on one of the chips of the motherboard, and it's responsible for bones operations, such equally booting and configuring hardware (mouse, keyboard, memory, processor, etc.). The Unified Extensible Firmware Interface (UEFI) is a modern software designed to supercede the legacy BIOS with additional benefits, such every bit improved security, faster boot times, big capacity hard drive support, and more.

Although these are dissimilar technologies, modern devices now apply UEFI, but to avoid defoliation, sometimes you'll continue to hear the term "BIOS" to refer to "UEFI."

If you apply a Windows ten device, normally, the firmware works automatically. However, sometimes you may still demand to enter the motherboard BIOS to troubleshoot problems, enable or disable features (such as virtualization, RAID array, and secure boot), adjust retentiveness and processor advanced settings, and more.

The only caveat is that the BIOS is a startup environment, which means that you tin't access it when Windows 10 is running. However, if y'all have to modify some system settings, there are multiple methods to access the motherboard firmware.

In this Windows x guide, we'll walk you through the steps to enter the BIOS/UEFI on your reckoner to modify advanced arrangement settings.

How to access UEFI (BIOS) using Settings
How to access UEFI (BIOS) using kick key selection

How to access UEFI (BIOS) using Settings

To enter the UEFI firmware from Windows ten, employ these steps:

Warning: Changing the wrong firmware settings can prevent your estimator from starting correctly. You should but access the motherboard firmware when you accept an excellent reason. It'south assumed that you know what you're doing.

Open Settings.
Click on Update & Security.
Click on Recovery.
Under the "Advanced startup" department, click the Restart now button.

Source: Windows Central
Click on Troubleshoot.

Source: Windows Central
Click on Advanced options.

Source: Windows Key
Click the UEFI Firmware settings selection.

Quick tip: If you have a legacy BIOS, the option will not be available. Source: Windows Key
Click the Restart button.

Source: Windows Primal

Once you complete the steps, the device will restart and boot into the UEFI firmware allowing yous to change advanced settings, such equally to disable or enable secure boot, change boot order, set upwards a hardware RAID array, enable virtualization, and other settings depending on the motherboard support.

How to admission UEFI (BIOS) using kicking central option

If y'all don't have access to the Windows 10 desktop or you're using a device with a legacy BIOS, so y'all tin can nevertheless access the firmware during kick.

To enter the UEFI or legacy BIOS during boot, use these steps:

Press the Power push.
See the screen splash to identify the cardinal you lot must press to enter the firmware (if applicable).
Press the required key repeatedly until you lot enter the setup way. Usually, y'all need to press the ESC, Delete, or i of the Function keys (F1, F2, F10, etc.).

After you complete the steps, the device will access the BIOS or UEFI firmware, depending on the motherboard support. If y'all don't see the information on the screen or the device boots besides fast, restart the device once more, and as shortly equally the boot starts, printing the required central multiple times quickly.

If you can't brand the computer to access the firmware using the keyboard, you may need to check your device manufacturer to find out the key that you lot need to printing during kicking.

Here are some computer brands and their respective keys to access the motherboard firmware:

Dell: F2 or F12.
HP: ESC or F10.
Acer: F2 or Delete.
ASUS: F2 or Delete.
Lenovo: F1 or F2.
MSI: Delete.
Toshiba: F2.
Samsung: F2.
Surface: Printing and hold volume up push button.

In the case that your device is using a UEFI firmware, and you can't seem to access it during startup, then it's recommended to utilise the Settings option from within Windows ten.